Minelab Explorer SE Pro

[admin]

SPECIFICATION
Image
Product Explorer SE Pro
Application Coin, Relic, Jewellery & Beach
Technology FBS
Frequency/Transmission Multiple frequencies: 1.5 - 100kHz
Coil (standard) 11" Double-D lightweight, waterproof.
Audio Output Internal speaker & 6.35mm (1/4") headphone jack.
Headphones Supplied Koss 100 ohm headphones.
Visual Display Large monochrome 71mm x 38mm (2.8" x 1.5") LCD with improved graphics and adjustable contrast.
Backlight Yes.
USB Connectivity -
Memory Settings saved automatically while detecting and remain until changed or reset.
Depth Indication Depth indicator, updates in Pinpoint mode.
Detect Modes -
Discrimination Smartfind™ 2 dimensional Discrimination: Ferrous 31, Conductivity 31. 8 discrimination patterns (Coins, Fe Coins, Jewellery, Foil, Pull Tab, Crowncap, Screwcap & Nail) & 6 user slots.
Timings -
Audio tone Constant & Multi-tone; customizable for conductivity or ferrous response.
Audio Type Long, Smooth & Pitch Hold.
Ground Balance Automatic ground compensation - advanced digital filtering.
Ground Balance Type -
Trash Density -
Pinpoint Non-motion with modulated audio.
Sensitivity Adjust Semi-automatic & Manual (adjustable 1 to 32).
Tune / Noise Cancel Manual & Automatic (11 channels).
Threshold Finer adjsutment level from 0 to 40.
Target Volume Adjust Limit & Gain (1 to 10).
Battery 1600mAh NiMH or Alkaline batteries.
Low battery alert Audio alert.
Length 1100mm - 1358mm (43" - 55").
Weight 1.7kg (3.7lbs) (ex. battery).
Warranty 3 years control box & coil.

[youtube]http://www.youtube.com/watch?v=rfBT-LxVoIg[/youtube]

[youtube]http://www.youtube.com/watch?v=kRkvHzjG6ow[/youtube]

[youtube]http://www.youtube.com/watch?v=YTEPATx02b4[/youtube]